News

In industrial applications, the issue of water leakage in high-pressure plunger pumps has drawn significant attention. Understanding the causes and corresponding solutions is crucial for maintaining the efficient operation of these pumps.   Common Causes and Solutions   1. Worn or Damaged Seals: The seals, including water seals and oil seals, can wear out over time due to normal operation, abrasive impurities in the fluid, or dry running conditions. When water seals are damaged, it may lead to water leakage. The solution is to replace the worn seals promptly. Regular maintenance and ensuring the purity of the pumped fluid can also extend the lifespan of the seals.   2. Plunger Wear and Tear: Continuous use can cause the plunger to wear, especially if the pump operates without proper lubrication or under harsh conditions. A worn plunger may result in a compromised seal between the plunger and the cylinder, leading to water leakage. In such cases, replacing the plunger with a new one is necessary. Additionally, routine inspection and proper lubrication can prevent premature plunger wear.   3. Cylinder Body Damage: Cracks or holes in the cylinder body can occur due to excessive pressure, mechanical stress, or manufacturing defects. This can cause water to leak from the pump. If the damage is minor, repairs such as welding can be attempted. However, replacing the cylinder body is the recommended solution in severe cases. Regular pressure checks and proper installation can help avoid such damage.   4. Valve Seal Failure: The seals of the inlet and outlet valves can deteriorate, allowing water to leak back. This may be due to the presence of debris or wear and tear. Cleaning the valves and replacing the seals can rectify this issue.   5. Loose Connections: Loose fittings or damaged gaskets at the pipe connections and flange joints can cause water leakage. Tightening the connections and replacing damaged gaskets can solve this problem.   Importance of Timely Maintenance   Regular inspection and maintenance of high-pressure plunger pumps are essential to identify and address potential water leakage issues before they escalate. By following the recommended maintenance schedules and promptly addressing any signs of wear or damage, industries can ensure the reliable performance of these pumps, minimize downtime, and reduce operating costs.   In conclusion, understanding the causes and solutions for water leakage in high-pressure plunger pumps is vital for the smooth operation of industrial processes. Implementing proper maintenance procedures and using high-quality replacement parts can help keep these pumps in optimal condition.  

1. Liquid-related factors  ① Impurities in the liquid: If there are solid particles such as sand, small stones, and metal filings in the cleaning liquid, these particles will pass through the nozzle along with the high-speed flowing liquid. As the particles pass through the interior of the nozzle, they will continuously rub and impact the inner wall of the nozzle, just like tiny "abrasive tools", gradually wearing down the nozzle. ② Chemical corrosion: Some cleaning liquids are corrosive. For example, when using strongly acidic (such as diluted hydrochloric acid, sulfuric acid) or alkaline (such as sodium hydroxide solution) cleaning liquids, a chemical reaction will occur with the nozzle material. After long-term contact, the material structure of the nozzle is damaged, leading to wear or damage. 2. Working condition factors ① Excessive pressure: When the working pressure of the high-pressure washer exceeds the rated pressure of the nozzle, the impact force of the liquid on the inner wall of the nozzle will increase significantly. This powerful impact force will cause the nozzle material to bear too much pressure, leading to faster nozzle wear and may even cause direct damage. ② Frequent use: If the high-pressure washer works for a long time and with high frequency, the nozzle will be continuously scoured by the liquid. Just like a bank constantly hit by water, even if the force of the water flow is normal, the long-term scouring will cause the nozzle material to fatigue and eventually lead to wear. 3. Physical factors ① Improper installation: If the nozzle is installed incorrectly, for example, with excessive force, an incorrect installation angle, or not properly tightened, it may cause tiny cracks or deformations in the nozzle. These problems will exacerbate the damage to the nozzle during use. ② Damage due to collision: The cleaning machine may accidentally collide in the working environment, or the nozzle may hit other hard objects during transportation or storage, which may directly cause damage to the nozzle.  

From September 18 to 20, 2024, Botuo participated in 2024 Indonesia Water Treatment Exhibition in Jakarta. At the exhibition, we showcased a series of remarkable products.   Botuo presented stainless steel high-pressure pumps and pump sets for RO applications (ranging from small to large flow). These products offer efficient and reliable solutions for the water treatment field. Meanwhile, the brass pumps for high-pressure cleaning also attracted the attention of many visitors. Their excellent performance and quality highlight BOTO's professional strength in the pump product field. In addition, the new water maker for yachts and fishing boats became a highlight of the exhibition. This product provides a convenient way to produce fresh water for yacht and fishing boat users, meeting their living needs on the water. It is worth mentioning that we also exhibited two high-pressure cleaning machines that can be used for car washing. Their powerful cleaning ability and convenient operation method bring new choices to the car washing industry. Botuo's excellent display at this exhibition not only showcases its innovative achievements in the water treatment and related fields but also lays a solid foundation for further expanding the international market. It is believed that in the future, Botuo will continue to create greater value for global customers with excellent products and services.      

At present, almost all Chinese banks have stepped up their scrutiny of Russia-related transactions or completely stopped accepting Russian payments to avoid becoming the target of U.S. sanctions. But our company now has a solution. We can receive RMB from Russia through VTB Bank (Vneshtorgbank), which greatly helps our company's Russian export business. If there are any suppliers or buyers who need help in this regard, please contact us.

The 2024 China Clean Expo (CCE) (Shanghai International Cleaning Technology and Equipment Expo) was successfully held in Shanghai from March 26 to 29, 2024.   This exhibition is extremely professional. Well-known companies including AR, PRATISSOLI, COMET, UDOR, HAWK, MAZZONI and other companies all participated in the exhibition.   Among them, our BOTUO company undoubtedly came out on top at this exhibition, attracting foreign businessmen from all over the world, such as Russia, Turkey, South Korea, Germany, Italy, etc.   Our Botuo products have been tested by domestic professional appraisal institutions. Our technical requirements and quality are among the internationally advanced levels. The products are exported to Taiwan, Japan, South Korea, Europe and USA, and other countries, are deeply trusted and praised by customers.   Botuo strives to provide the cleaning industry with clean, safe and efficient cleaning technologies and solutions to help the industry flourish.  

1. Product performance advantages ① High-pressure water gun wall napping machine adopts high-pressure pump, frequency conversion motor, frequency conversion electric control, water tank, filter, high-pressure rubber hose, high-pressure napping gun, and special nozzle for napping. The effect of roughening the wall is good. ② There are few wearing parts of the equipment, and the maintenance is simple and convenient. The equipment is placed on the first floor. You only need to pull the high-pressure roughening gun to the floor where roughening is required, connect water and electricity, and start the roughening of the concrete wall with one button on the remote control. ③ The equipment is equipped with overpressure protection, water shortage, power failure, fault warning system, and the operation is safe and simple. ④ Brushing with a high-pressure water gun can effectively remove the cement slurry layer on the surface, allowing cement paste and tile adhesive to penetrate into the wall better to achieve permanent fixation, and because of the water, it can maintain the wall and clean the surface of the light body. ⑤ Eliminate the need for secondary leakage repair, and no more problems such as hollowing, cracking, and falling off. ⑥ After roughening or chiseling with high-pressure water gun, the surface is clean and rough, which is more guaranteed to prevent the bonding strength of paint. ⑦ There is no pollution such as dust and garbage such as ash, and the construction environment is healthier. ⑧ Energy saving and consumption reduction, roughening and construction can be carried out at the same time to shorten the construction period. 2. Application scope The ultra-high pressure water gun wall roughening machine is used in the roughening of inner walls and outer walls of construction projects, roughening of dam construction joints, high-pressure water roughening of rafts, roughening of stone materials, etc.

Our factory will have the New Year (Spring Festival) holiday from February 1st to February 21st. During this time, production and shipments will be suspended. We apologize for any inconvenience caused. We will return to work on February 22nd and our team will be back in time to serve you. We would like to take this opportunity to thank you for your continued support and loyalty to our business. If you have any questions or concerns about your order, please feel free to contact us before the holidays. We will try our best to help you and ensure your satisfaction. Thank you again for your understanding and cooperation. We wish you good health and a successful career in the new year.

We are pleased to announce that we have successfully exhibited our products, including plunger pumps and high pressure cleaning machines at the Canton Fair. We would like to thank our loyal customers and partners for your continuous support and encouragement. Our plunger pumps are designed to handle high pressure and heavy-duty applications in various industries, such as oil and gas, mining, construction, and agriculture. They are known for their reliability, durability, and low maintenance. They are available in different sizes and configurations to meet your specific requirements. Our high pressure cleaning machines are ideal for cleaning and washing tasks in industrial, commercial, and residential settings. They can remove stubborn dirt, grease, and stains from surfaces, machinery, vehicles, and equipment quickly and efficiently. They are also safe and easy to operate, with adjustable pressure. During the Canton Fair, we received numerous inquiries and orders from visitors and buyers from all over the world. They were impressed by our products' quality, performance, and value for money. We also had fruitful discussions with many potential partners and distributors who showed great interest in cooperating with us in the future. We are now preparing for the next exhibition and looking forward to showcasing our latest innovations and solutions to you. We are committed to providing you with the best products, services, and support. Please stay tuned for our updates and announcements. Thank you for your attention and support!

Botuo is a professional manufacturer of high-pressure plunger pumps and high-pressure cleaning machines. Our products are designed to provide exceptional high-pressure cleaning capabilities for a variety of applications, including agricultural, industrial and commercial environments. We are pleased to announce that we will work with our customers to participate in the 134th Canton Fair, which will be held from October 15th to 19th, 2023. At the exhibition, we will display our high-pressure washers, plunger pumps, high-pressure guns and other accessories. We warmly invite you to visit our booth. Our booth number is 18.2A10-11. Canton Fair address: Guangzhou Pavilion, No. 382, Yuejiang Middle Road, Haizhu District, Guangzhou City, Guangdong Province. We look forward to seeing you there and sharing our great products with you.

A watermaker is a device used to obtain potable water by reverse osmosis of seawater. In boating and yachting circles, desalinators are often referred to as "watermakers". Advantages 1. A watermaker uses only a small amount of fuel to generate a large amount of water, eliminating the need for large, heavy water tanks. 2. The watermaker is independent of the shore water supply and can be used in remote areas. 3. They provide safe water when shore-based water is of uncertain quality. 4. fully automated desalination process with minimal maintenance. 5. high level of sea water purification - from 97 to 99%. 6. additional comfort of life on board. 7. unlimited range of sea crossings; 8. safe water supply onboard in regions where water quality does not pass the necessary sanitary control. 9. emergency water supply in case of tanks breakage or water spoilage inside. 10. reducing the weight of the yacht, increasing its performance by eliminating the need for constant storage of large volumes of water. 11. cost savings in some Caribbean ports where water is scarce and therefore expensive. Technology All watermakers designed for small boats and yachts rely on essentially the same technology, exploiting the principle of "reverse osmosis": a high pressure pump forcing seawater through a membrane that allows water but not salt to pass. The common comparison is that of a filter; however, as the holes in the membrane are smaller than molecules of sodium chloride (salt) and indeed smaller than bacteria, and pressures in the nature of 45-50 bar are required, the process is much more complex than the common water filter or the oil filter found in automobile engines.

PINFL high pressure plunger pumps require specific GL-5 SAE 85W-90 or CKD 220 lubricants to ensure performance and longevity. High pressure plunger pumps require oils with low friction and high viscosity index to ensure adequate lubrication and protection under extreme operating conditions. GL-5 SAE 85W-90 motor oil has a high viscosity index, which can provide excellent anti-wear properties and withstand high temperature and high pressure environments. CKD 220 lubricating oil also has a high viscosity index and is suitable for long-term heavy load applications. These conditions are consistent with the use of high-pressure plunger pumps. Therefore, in order to ensure the safe and long-term use of PINFL high pressure plunger pump, please use GL-5 SAE 85W-90 or CKD 220 lubricating oil.

1. The working performance of the high pressure pump is determined by the two parameters of pressure and flow rate. Choose the pressure and flow of the high-pressure pump according to the continuous working time and the required working pressure and flow. The calibrated pressure and flow rate of the high-pressure pump are the maximum pressure and flow rate used by the high-pressure pump. For example, the self-service car washing machine, the car washing time is not long, you can directly choose the pressure and flow calibrated by the high-pressure pump as the working parameters. If you use a high-pressure washer (equipment) to work on the production line, and the continuous working time is far more than 8 hours, you must confirm with the technician when purchasing whether the pump can withstand long-term work. 2. In the selection of supporting motors, it is recommended to use three-phase motors as much as possible, especially for industrial applications. 3. The cleaning power of the high-pressure washer is determined by the two parameters of the pressure and flow of the high-pressure pump. Generally, buyers will choose a washing machine with suitable pressure according to their own experience. The following is the data table for choosing different pressures for different cleaning objects, which can be referred to: 4. For high-pressure washers with the same power, the cleaning power of the washer with larger flow rate is stronger.

During the working process of the high-pressure pump, in order to ensure that the pressure of the system will not cause damage to the high-pressure system due to overpressure, a safety valve or a pressure regulating valve must be configured. Safety valve or pressure regulating valve is an essential part of a high-pressure fluid system. Its main function is to play the role of safety overflow to protect the safe operation of the high-voltage system. The difference between safety valve and regulating valve: When the pressure in the equipment or pipeline exceeds the set pressure of the safety valve, the safety valve will automatically open to release the pressure, ensuring that the medium pressure in the equipment and pipeline is below the set pressure, protecting the equipment and pipeline, and preventing accidents. The pressure regulating valve plays the role of stabilizing or regulating the pressure. The value of the pressure can be set. When the pressure is higher than this value, the valve will open, and when the pressure is lower than this value, the valve will be closed.

Components of high-pressure triplex plunger pump: Crankcase, crankshaft, pump head, connecting rod, plunger, check valve, water seal, plunger oil seal, crankshaft oil seal, oil dipstick, rear end cover, etc. The main wearing parts include: water seal, plunger oil seal, check valve. Working principle of high pressure three plunger pump: When the power drives the crankshaft of the high-pressure pump to run, the connecting rod drives the plunger to move from the top dead center to the bottom dead center, at the same time, the water inlet check valve of the pump is opened, and the water outlet check valve is closed to complete the water absorption process. The connecting rod drives the plunger While moving from the bottom dead center to the top dead center, the water inlet one-way valve of the pump is closed, and the water outlet one-way valve is opened to complete the pumping process, and thus reciprocate to realize the pumping of the high-pressure pump. No matter what the structure of the pump is, the pumping process of the pump is: in the closed volume, by changing the change of the closed volume, the suction and discharge of water are completed to realize the pumping of the pump. The principle is similar to the syringe used by doctors.

High pressure water jet is a high - tech cleaning technology. It has the features of low cleaning cost, fast cleaning speed, high cleaning rate, no damage to the cleaned material, wide application range, no pollution to the environment, etc. High pressure water jet means that water is increased to high pressure through high pressure water system, and then converted into high speed micro water jet through injection device with small aperture. The speed of the water jet is powerful and can be used to complete a variety of cleaning operations. Compared with traditional manual, mechanical and chemical cleaning, high pressure water jet cleaning has the following advantages: (1) The pressure and flow rate of the water jet can be easily adjusted, so that the matrix of the cleaned substance will not be damaged. (2) High pressure water jet cleaning will not cause secondary pollution. (3) Can clean the shape and structure of complex objects, can be in the space of narrow or harsh environment for cleaning operations. (4) High pressure water jet cleaning is fast and thorough. (5) Low cleaning cost. (6) High pressure water jet cleaning is widely used, and there are no special requirements for equipment material, characteristics, shape and scale species. Only water jet is required to meet application requirements. (7) High pressure water jet can reduce the air dust concentration in the working area and protect the environment.

The working principle of the fog cannon truck is to pump water from the water tank through the filter and high pressure pump. The pressurized water is transported through the high-pressure nozzle atomization device on the cannon to form water mist floating in the air. The water mist can absorb fine dust and suspended particles in the air to achieve dust reduction. The function of the fog cannon vehicle is to reduce dust, decompose and dilute the particle concentration in the air, and effectively decompose the polluted particles and dust in the air in haze weather, effectively alleviating the haze. 1. Dust suppression. The water mist particles sprayed by the fog cannon vehicle are extremely fine, reaching the micron level, which can quickly force the polluting particles and dust floating in the low air to the ground, achieving the effect of suppressing dust and cleaning and purifying the air. 2. disinfect. Dilute the disinfectant in proportion and add it to the fog cannon. The diluted agent is formed into atomized particles through the atomizer, which can fully contact and absorb germs and dust, so as to avoid being inhaled by pedestrians into the respiratory tract. During the epidemic prevention and control period, a number of fog cannon vehicles targeted the key areas of the central urban area to disinfect, providing an effective environmental sanitation and disinfecting guarantee for the epidemic prevention and control. 3. Purify the road environment. In high temperature weather, the water mist particles sprayed by the fog cannon into the air can slow down the secondary generation of ozone by weakening the photochemical reaction rate, while increasing the air humidity and reducing the road surface temperature. PINFL pumps are the first choice for fog cannon trucks due to their large flow, high pressure and excellent quality.

The high-pressure water unblocking sewer machine is a machine specially used to clean up sewer blockages. It uses high-pressure water to wash away the dirt and debris in the hoseline to keep the sewer unblocked. The machine has the characteristics of high efficiency, speed, safety and economy, and is widely used in urban hose network, municipal environmental sanitation, sewage treatment and other fields. The machine uses a high-pressure water pump as the main power, enters the sewer hose through the casing, and under the control of the operator of the machine, under the action of the water gun, quickly flushes out the sundries in the hose to achieve the purpose of dredging the sewer. Compared with the traditional cleaning method, the high-pressure water dredging machine has very low environmental pollution, and the cleaning effect is also better. It can not only greatly save cleaning time, but also greatly reduce cleaning costs and reduce the economic burden on owners and property owners. In terms of operation, the high-pressure water dredging sewer machine adopts the human-computer interaction mode, which is easy to operate and has high safety. This machine is not only suitable for urban hose network cleaning, but also for the cleaning of waste water hoses in industrial production. It is undeniable that the high-pressure water dredging machine is one of the necessary equipment for the high-quality construction of the urban environment. The goal of its cleaning is not only to keep the hoseline unobstructed, but to improve the quality of the urban environment, improve public health, and promote the classification of citizens' garbage and environmental protection. Deepening of consciousness. In general, the high-pressure water dredging machine can not only improve the sanitation level, but also make the city more livable, tidy and beautiful. In the future development, we should continuously improve technological innovation and management level, and spread its advantages to a wider range, more cities and industries, and realize a clean, beautiful and harmonious ecological environment.

marine cleaning machine is a specialized equipment designed for cleaning purposes onboard ships. It primarily operates on a power supply of 60Hz/440V, as it is sourced from diesel power generators. This cleaning machine is specifically designed to cater to the unique cleaning requirements of ships, which often face challenging and demanding environmental conditions. The 60Hz/440V power supply ensures that the machine can efficiently handle the cleaning tasks while maintaining optimal performance. Given that ships rely on diesel power generators for their electrical needs, the ship cleaning machine is designed to operate seamlessly with this power source. The 60Hz frequency and 440V voltage are compatible with the electrical systems commonly found on ships, allowing for smooth integration and operation. With its robust design and reliable power supply compatibility, the ship cleaning machine ensures effective and efficient cleaning operations onboard vessels. It is capable of tackling various cleaning tasks, such as removing dirt, grime, and other contaminants from different surfaces and equipment found on ships. In conclusion, the ship cleaning machine is an essential equipment onboard ships, primarily operating on a 60Hz/440V power supply sourced from diesel power generators. Its compatibility with the ship's electrical system allows for efficient and effective cleaning operations, ensuring a clean and well-maintained ship environment.

1. Preparation before startup Before starting up, check whether the screws and nuts in various parts of the cleaning machine are loose. Add the correct type of engine oil into the crankcase of the pump, with the oil level in the center of the oil mirror. 2. Connect the water inlet hose Put the water inlet hose on the water inlet connector of the pump, put on the buckle, and tighten the screw on the buckle to ensure that the connection is firm and airtight. Connect the other end to the faucet or put it into the water supply pool (the water inlet must be completely immersed in the water). The water inlet hose requires a filter to prevent inhaled impurities from damaging the high-pressure pump. 3. Connect the water outlet hose One end of the high-pressure hose is connected to the water outlet of the machine, and the other end is connected to the high-pressure gun. Note: The high-pressure hose cannot be twisted and should be extended and straightened as much as possible. 4. Power connection Confirm that the power supply voltage frequency is consistent with the motor nameplate, and connect the cable to the power socket. 5. Replaceable nozzles The machine is equipped with replaceable quick-plug nozzles. Nozzles with different water jet angles can be replaced according to cleaning needs. 6. Start the machine Turn on the power, trigger the high-pressure gun, and wait until the air in the machine is drained, and high-pressure water will spray out.

From April 19th to 21st, the "24th China International Expo 2023" was held at the Shanghai New International Expo Center. At the exhibition, our company mainly exhibited our E series, WK and other products, which can be applied in the fields of landfill leachate, seawater reverse osmosis, water and sewage treatment, etc. You can click our website to learn more about our products, and welcome your inquiries anytime.